With 2×8 arrays of LEDs you can create your own Bike twilight similar to the project posted here by justDIY. Its a one week job for you to build your wonderful creation. Wide options are available to make your project attractive like: you can add some automatic control circuitry, painting the circuit boards, masking off each LED lens […]
Category Archives: Flashlight
You can build your own repulsor-like LED flashlight that can be mounted on your hand palm comfortably. You can turn ‘ON’ this Gadget to produce brighter light as you move your hand back and forth. With this powerful LED flashlight mounted on your hand palm, you’ll look like an ‘Iron Man’ !! Similar design as shared […]
If you are planning to implement any electronic moving display system that is activated by movements in its surroundings then just have a look on the project posted by Jer from Volts and Bytes, where an Atmega8 is used to activate a Sure Electronics 0832 LED matrix display when motion is detected by the attached PIR sensor. Check the link […]
Matt‘s team found an old, single-slide, sans-carousel slide projector, which they up-cycled to the 21st century’s truly digital projector by adding a 10 Watt LED and a Nokia 1200 LCD. The build uses an ATmega88 microcontroller to control LCD images, and an infrared receiver to advance the slides and turns the projector ON and OFF remotely. […]
If you have a show car the here is an interesting project for you. You can build your own RGB LED Vehicle Turn Signals that StarfireMX developed for his Ford Mustang. The system used a number of Arduino based controllers and XBee wireless devices to allow remote control of the modes and color selections. Starfiretech […]
JustDIY shared a powerful spot light consisting of three 200+ lumen neutral-white Rebels that can be used for your workbench. Driving the Rebels is a 1a Buck Puck from LED dynamics. Moreover you can have potentiometer based control over the amount of blinding from the light.